Menu 13 Single Line Descriptions − EtherCAT Setup

Mode: RFC‑A

Parameter		Range	Default	Type
13.001	Module ID	0 to 65535		RO	Num	ND	NC	PT
13.002	Software Version	0 to 99999999		RO	Num	ND	NC	PT
13.003	Hardware version	0.00 to 655.35		RO	Num	ND	NC	PT
13.004	Serial Number LS	00000000 to 99999999		RO	Num	ND	NC	PT
13.005	Serial Number MS	0 to 99999999		RO	Num	ND	NC	PT
13.006	Status	Bootldr ‑ Update (-2), Bootldr ‑ Idle (-1), Initialising (0), OK (1), Config (2), Error (3)		RO	Txt	ND	NC	PT
13.007	Reset	Off (0) or On (1)	Off (0)	RW	Bit		NC
13.008	Default	Off (0) or On (1)	Off (0)	RW	Bit		NC
13.031	Slot indicator	1 to 8		RO	Num	ND	NC	PT
13.032	Slot menu number	0 to 255		RO	Num	ND	NC	PT
13.033	Disable drive control	Off (0) or On (1)	Off (0)	RW	Bit				US
13.034	Allow EEPROM Upgrade	Off (0) or On (1)	Off (0)	RW	Bit
13.035	Configured station alias	0 to 65535	0	RW	Num		NC	PT	US
13.036	Consistency trigger for synchronous outputs	Off (0) or On (1)	Off (0)	RW	Bit				US
13.037	Consistency trigger parameter for synchronous outputs	0 to 999999	0	RW	Num	DE			US
13.038	Consistency trigger for synchronous inputs	Off (0) or On (1)	Off (0)	RW	Bit				US
13.039	Consistency trigger parameter for synchronous inputs	0 to 999999	0	RW	Num	DE			US
13.040	Consistency trigger for non‑synchronous outputs	Off (0) or On (1)	Off (0)	RW	Bit				US
13.041	Consistency trigger parameter for non‑synchronous outputs	0 to 999999	0	RW	Num	DE			US
13.042	Consistency trigger for non‑synchronous inputs	Off (0) or On (1)	Off (0)	RW	Bit				US
13.043	Consistency trigger parameter for non‑synchronous inputs	0 to 999999	0	RW	Num	DE			US
13.045	Homing Position Save	Off (0) or On (1)	Off (0)	RW	Bit			PT	US
13.046	Homing Position Parameter	51 to 54	51	RW	Num			PT	US