smartESOX pro
Industrial 3-phase electricity meter
-
Measurement of active and reactive energy
-
A design with enhanced durability
-
For customers with power supply from high, medium and low voltage
Find out what the smartESOX pro meter has to offer
The smartESOX pro is a high-precision, multi-tariff, four-quadrant operation active and reactive energy meter designed for use in three-phase 3- or 4-wire networks. The device is intended for industrial applications and for balancing electricity consumption both indoors and outdoors. Designed for customers with a high, medium or low voltage power supply. It offers extensive capabilities for measuring and recording electrical quantities and power quality parameters. It is the optimal solution for high-precision metering, including in Smart Grid networks. The meter features a design with enhanced durability.
Measurement of instantaneous, peak, excess and cumulative power
Measurement of transformer losses: OLA, NLA, OLR, NLR, I²t, U²t
Measurement of network parameters, including voltages, currents, voltage and current harmonics, frequency, THD, unbalance factor, and neutral current
Monitoring of network parameters: voltage drops and surges; prolonged power supply outages; current and voltage imbalance; current flow without voltage; absence of current flow; current exceeding the limit
Semi-direct or CT/VT connection via current transformers and, optionally, voltage transformers
Energy metering across six tariff zones, switched by a built-in real-time clock
Extensive options for recording sizes:
- freely configurable profiles with different recording intervals
- the ability to configure a different set of data for recording for each profile
Extensive event logging
- 7 event groups recorded in separate logs
- sending immediate event notifications to a host device/system
Extensive options for recording measured sizes during billing periods
- up to 50 sizes recorded during billing periods
DLMS/COSEM communication protocol, capability to read measurement data via the PN-EN 62056-21 (IEC 1107) protocol
Three built-in communication ports: one optical port and two serial ports
Replaceable communication module: 3G/GPRS or Ethernet
Built-in backup power supply connected to an external power source
Energy readings can be viewed on the display even when there is no mains power supply – powered by a replaceable AA battery
Ability to view profiles and billing periods on the LCD display
The device shown is an example of a bespoke solution specifically designed and developed for a particular OSD in accordance with the technical specifications of the relevant tender. This information is provided in accordance with the provisions of the Act of 11 September 2015 on waste electrical and electronic equipment.