Rozłącznik izolacyjny smartARS 00 pro

smartARS 00 Pro

Fuse switch disconnector

  • Suitable for NH00-size fuses (160 A)

  • A flame-retardant, self-extinguishing plastic with a V0 flammability rating

  • Two-pole contact arrangement

Ask about this product

Na każdą wiadomość staramy się odpowiadać maksymalnie w 24 godziny (dni robocze).

Find out what the smartARS 00 pro switch disconnector has to offer

smartARS pro fuse switch disconnectors are used for energy distribution and to provide protection against the effects of short circuits and overloads in three-phase AC circuits. They are designed for direct installation on horizontal or vertical busbar systems as three-phase vertical units. smartARS pro fuse switch disconnectors meet the technical requirements of Polish and European power companies.

Quick installation using PPN technology

Remote monitoring

Option to change the direction of the drain flow from top to bottom

Designed for installation on 185mm busbar system

Versions

Installation on a 185 mm pitch rail bridge,
1-POLE SWITCHING - each phase individually

Installation on a 185 mm pitch rail bridge;
3-POLE SWITCHING - 3 phases with a single handle

  • smartARS 00-1-V pro cable connection: V-type terminals; V-clamp 25-150SW
  • smartARS 00-1 pro cable connection: bridge terminals (S) 4–70mm² and M8 screw terminals


  • smartARS 00-3-V pro cable connection: V-type terminals; V-clamp 25-150SW
  • smartARS 00-3 pro cable connection: bridge terminals (S) 4–70mm² and M8 screw terminals

The smartARS 00 pro version is aligned to the height of the smartARS 2 and 3 pro without the use of adapters
Installation on a busbar with a pitch of 185 mm,
1-POLE SWITCHING - each phase individually

Installation on a busbar with a pitch of 185 mm;
3-POLE SWITCHING - 3 phases with a single handle


  • smartARS 00-1-V-W pro cable connection: V-type terminals; V-clamp 25-150SW
  • smartARS 00-1-W cable connection: bridge terminals (S) 4–70mm² and M8 screw terminals





  • smartARS 00-3-V-W pro cable connection: V-type terminals; V-clamp 25-150SW
  • smartARS 00-3-W pro cable connection: bridge terminals (S) 4–70mm² and M8 screw terminals


Applications of the smartARS 00 pro isolating switch

Transformer stations

The use of strip-type isolating switch disconnectors in transformer substations ensures the highest standards of operational safety. The design of the switchgear allows for rapid disconnection of the power supply. Furthermore, its resistance to harsh conditions and temperature fluctuations means the equipment does not require frequent servicing, thereby reducing operating costs.

Low voltage switchgears

The strip-type fuse switch disconnector is a solution designed to optimise space in LV switchgear. Thanks to its compact design, it facilitates the arrangement of equipment whilst ensuring reliable circuit protection. A well-designed connection system allows cables to be neatly and safely routed, which speeds up installation and makes future inspections easier.

Cable connectors

The strip-type fuse switch disconnector ensures effective circuit isolation, thereby enhancing staff safety during operational work. Furthermore, the device minimises the risk of phase-to-phase short circuits, and its design guarantees the stability of the network parameters.