Digitax HD Converter
Digitax HD servo drives
-
Digitax HD servo drives are state-of-the-art systems designed for single-axis and multi-axis operation
-
Control can be achieved via digital and analogue inputs, communication interfaces or via the built-in motion controller
-
Control of both speed and torque
Find out what the Digitax HD converter has to offer
Discover the key features of the product that influence its effectiveness. Find out where its application is best and why it is worth choosing.
Built-in Class A RFI filter
Built-in PID controller
Built-in braking transistor
Two ports for the installation of optional modules
Free configuration software for PC Connect
Two built-in Safe Torque Off safety inputs
The ability to program the internal PLC in CodeSys using the free Machine Control Studio software
Advanced Motion Controller (AMC)
There are three versions of the Digitax HD drive:
- Digitax HD M750 – version equipped with an Ethernet interface
- Digitax HD M751 – basic version equipped with a Modbus RTU interface
- Digitax HD M753 – version equipped with an EtherCAT interface
The drive enables control of:
- AC servo motors in closed-loop control (RFC-S)
- Permanent magnet motors in open and closed loop (RFC-S)
- Squirrel-cage induction motors in open-loop mode (Open Loop)
- Squirrel-cage induction motors in open and closed loop (RFC-A)
- In regenerative mode with energy feedback to the grid (Regen)
Options
Module for the PROFINET communication protocol
Module for the PROFIBUS communication protocol
Module for the DeviceNet communication protocol
Module for the CANopen communication protocol
External Ethernet communication module supporting the EtherNet/IP and Modbus TCP/IP protocols
Module for the EtherCAT communication protocol
An I/O expansion module that increases the number of available input/output terminals on the drive. Provides additional: 4 x digital I/O, 3 x analogue inputs (default)/digital inputs, 1 x analogue output (default)/digital input, 2 x relay outputs
Input module for an incremental encoder. Closed-loop rotor flux control for induction motors (RFC–A) in the M600
An additional combined I/O module supporting incremental encoders, SinCos encoders, HIPERFACE, EnDAT and SS
A module offering a smart and programmable solution that enables compliance with the requirements of the IEC 61800-5-2 safety standard
The SM-Applications module allows existing programmes, written in the SYPTPro development environment, to be uploaded to the Unidrive M700 drive
A second processor module that enables the creation of advanced machine control systems using the CoDeSys programming environment
A second processor module that enables the creation of advanced machine control systems using the CoDeSys programming environment. It also features a dual Ethernet port that interfaces directly with the CoDeSys processor, expanding machine control capabilities and enabling the M700 and M800 drives to communicate simultaneously with two different Ethernet networks
A multilingual text-based LCD display, showing up to four lines of text with descriptions of parameters and data, ensures greater ease of use
All the functions of the KI-Keypad, with an additional real-time clock and its own battery power supply, enabling accurate diagnostics and rapid troubleshooting
The USB cable allows you to connect the drive to a PC so that you can use the Digitax HD drive’s PC tools
Drive interface components
| Drive interface components | |
|---|---|
| CT USB Comms communication cable | Obraz
|
Training
We organise training courses for all the drives we offer. Please contact us for further details.