Unidrive M700 drive
Unidrive M700 – (0.37 kW – 1.2 MW)
-
Class-leading performance from induction motors, servo motors and permanent magnet motors, combined with a built-in real-time Ethernet protocol
-
U/f and vector control in open-loop mode, open-loop and closed-loop rotor flux control for induction motors (RFC-A), open-loop and closed-loop control for permanent magnet synchronous motors (RFC-S), mode
-
Control of permanent magnet servo motors
Find out what the Unidrive M700 drive has to offer
Built-in Class A RFI filter
Built-in PID controller
Built-in braking transistor
Three ports for the installation of optional modules
Control of both speed and torque
Unidrive M Connect: Free control and monitoring software for PC
Built-in dual Safe Torque Off safety input
The ability to program PLCs in CodeSys using the free Engineering Control Studio software
Advanced Motion Controller (AMC) with support for motion during operation
The Unidrive M700/701 variable frequency drive features a built-in Safe Torque Off (STO) safety input (the Unidrive M-702 features a dual STO input)
Options
Unidrive M700 inverters can be expanded with the features of the following modules:
Module for the PROFIBUS communication protocol
Module for the DeviceNet communication protocol
Module for the CANopen communication protocol
External Ethernet communication protocol module supporting PROFINET RT, EtherNet/IP and Modbus TCP/IP
Module for the EtherCAT communication protocol
An I/O expansion module that increases the number of available input/output terminals on the drive. Provides additional: 4 x digital I/O, 3 x analogue inputs (default)/digital inputs, 1 x analogue output (default)/digital input, 2 x relay outputs
Input module for an incremental encoder. Closed-loop rotor flux control for induction motors (RFC–A) in the M60
An additional combined I/O module supporting incremental encoders, SinCos encoders, HIPERFACE, EnDAT and SS
A module offering a smart and programmable solution that enables compliance with the requirements of the IEC 61800-5-2 safety standard
The SM-Applications module allows existing programmes, written in the SYPTPro development environment, to be uploaded to the Unidrive M700 drive
A second processor module that enables the creation of advanced machine control systems using the CoDeSys programming environment
A second processor module that enables the creation of advanced machine control systems using the CoDeSys programming environment. It also features a dual Ethernet port that interfaces directly with the CoDeSys processor, expanding machine control capabilities and enabling the M700 and M800 drives to communicate simultaneously with two different Ethernet networks
A multilingual text-based LCD display, showing up to four lines of text with descriptions of parameters and data, ensures greater ease of use
All the functions of the KI-Keypad, with an additional real-time clock and its own battery power supply, enabling accurate diagnostics and rapid troubleshooting
The USB communication cable allows you to connect the drive to a PC so that you can use the Unidrive M PC tools
Training
Topic: Unidrive M700 variable frequency drives (also for maintenance teams)
Drives from Control Techniques, Emerson Industrial Automation, Leroy Somer
Training programme:
- Presentation of Unidrive M600-M702 drives (design, technical data, parameters)
- Mechanical and electrical installation
- Drive programming (keypad, Unidrive M Connect software)
- Commissioning the drive, parameter adjustment, tuning
- Fault diagnostics
- Selection and application of optional components
You can find detailed information in theProduct and Technical Trainingtab or in the 2017 Training Catalogue.
Drive interface components
| Smartcardkkkkkkkk | kkkkkhuytujhfut | ghufty | |
| Drive interface components | |
|---|---|
| Smartcard | Obraz
|
| SD card adapter | Obraz
|
| AI-485 adapter | Obraz
|