Unidrive M600 drive
Unidrive M600 – (0.75 kW–1.2 MW)
-
High-efficiency variable frequency drives
-
For induction motors and sensorless control of permanent magnet synchronous motors
-
U/f and vector control in open-loop mode, rotor flux control in open-loop and closed-loop modes (when the SI Universal Encoder module is added) for induction motors (RFC-A), open-loop control for permanent magnet synchronous motors
Find out what the Unidrive M600 drive has to offer
Built-in Class A RFI filter
Built-in PID controller
Built-in braking transistor
Three ports for the installation of optional modules
Control of both speed and torque
Unidrive M Connect: Free control and monitoring software for PC
Built-in dual Safe Torque Off safety input
The ability to program PLCs in CodeSys using the free Engineering Control Studio software
Options
Unidrive M600 inverters can be expanded with the features of the following modules:
module for the PROFIBUS communication protocol
module for the DeviceNet communication protocol
module for the CANopen communication protocol
external Ethernet communication module supporting PROFINET RT, EtherNet/IP and Modbus TCP/IP
module for the EtherCAT communication protocol
An I/O expansion module that increases the number of available input/output terminals on the drive. Provides additional: 4 x digital I/O, 3 x analogue inputs (default)/digital inputs, 1 x analogue output (default)/digital input, 2 x relay outputs
Input module for an incremental encoder. Closed-loop rotor flux control for induction motors (RFC–A) in the M600
additional integrated I/O module, supporting incremental encoders, SinCos encoders, HIPERFACE, EnDAT and SS
a module offering a smart and programmable solution that enables compliance with the requirements of the IEC 61800-5-2 safety standard
An adapter enabling communication with the drive via the RS485 port. Commonly used to connect to a remote panel or for communication via RS485 when an AI-485 adapter is not available or has already been used
a multilingual text-based LCD display, showing up to four lines of text with descriptions of parameters and data, ensures greater ease of use
all the functions of the KI-Keypad, with an additional real-time clock and its own battery power supply, enabling accurate diagnostics and rapid troubleshooting
The USB communication cable allows you to connect the drive to a PC so that you can use the Unidrive M PC tools
Training courses
Topic: Unidrive M600 variable frequency drives (also for maintenance teams)
Drives from Control Techniques, Emerson Industrial Automation, Leroy Somer
Training programme:
- Presentation of Unidrive M600-M702 drives (design, technical data, parameters)
- Mechanical and electrical installation
- Drive programming (keypad, Unidrive M Connect software)
- Commissioning the drive, parameter adjustment, tuning
- Fault diagnostics
- Selection and application of optional components
Drive interface components
| Drive interface components | |
|---|---|
| Smartcard | Obraz
|
| SD card adapter | Obraz
|
| AI-485 adapter | Obraz
|
| CT USB Comms cable | Obraz
|