MICRO 2 NTE

Universal substation telecontrol system

Monitoring of both small and large energy facilities
Flexible controller configuration, tailored to specific requirements
Collecting data from the facility, executing control commands, and taking measurements

Find out what the MICRO 2 NTE controller has to offer

The MICRO 2 NTE controller is a universal telemechanics unit (RTU) designed for monitoring both small and large power facilities. The device is tasked with collecting information from the facility (e.g. signals from switchgears and field equipment), executing control functions and performing measurements.

Depending on the configuration, the MICRO 2 NTE telemechanics controller can perform a variety of functions. The modular design of the device allows for flexible configuration of the controller, tailored to the specific needs and requirements of the user.
If the capacity of the data collection system is insufficient, two controllers can be applied, which appear as a single RTU to the monitoring centres. This allows for flexible configuration of the telemechanics system, tailored to the size of the monitored facility.

Alarm outputs modules

Control output modules

Constant-current measurement/output modules

AC measurement modules

Counter inputs for reading data from pulse meters

Model		MICRO 2 NTE
Power supply	Power supply voltage	Dual-circuit power supply U1=20–60 V DC or 90–230 V DC and U2=90–230 V DC
Power supply	Power consumption	20 W
Functional units	Communication modules	Max 3 modules, each with 2 connectivity channels
	Binary input module	Max 8 binary input modules
	Binary output module	Max 8 modules, each with 16 relay outputs
	AC measurement module	Max 16 analogue inputs
	DC measurement module	8 inputs
	Counter inputs	8 inputs
Connectivity	Communication interfaces	10/100BASE-TX (optional), 100BASE-FX (optional). RS485/RS422, RS232, RS485BEL, FBR, OC/CL, LON, CAN
Connectivity	Communication protocols	DNP3, MAP27, BEL, MST, IEC 60870-5-101/103/104, IEC 1107, SPA, MODBUS, GGPS, LON, CAN, GPRS, PPM2, IP (TCP, UDP, ICMP, SLIP)
Enclosure	Dimensions (HxWxD)	268 x 482 x 265 mm
	Weight	≤ 4 kg
	Enclosure versions	6U/42U or 6U/84U rack-mount or panel-mount installation
	Operating environment	enclosed
	Degree of protection according to PN-EN 60529	IP20
Operating conditions	Operating temperature	from -10°C to +55°C
	Storage temperature	from -20°C to +70°C
	Relative humidity	up to 95%

MICRO 2 NTE

Find out what the MICRO 2 NTE controller has to offer

Catalogues

Software