MP-01, MP130-01

Propeller (Woltman) water meters with a vertical rotor axis

Please note: This product has been discontinued!

Find out what the MP-01 and MP130-01 water meters have to offer

The MP-01 and MP130-01 are propeller (Woltman) water meters with a vertical rotor axis, designed to measure the consumption of large volumes of water in closed systems with full flow. The devices are capable of measuring cold water at temperatures up to 30°C or 50°C and hot water at temperatures up to 130°C, at a maximum operating pressure of 16 bar (PN16). The water meters are designed for installation in horizontal pipes with the counter facing upwards (H). They are fitted as standard with a six-drum counter with IP65 protection (IP68 optional) and a painted cast iron body. The water meters are suitable for use in automatic meter reading (AMR) systems.

Note: product discontinued.

By using the MP-01 or MP130-01 water meter, you gain:

the ability to work with remote reading systems

the ability to measure cold and hot water

compliance with metrological requirements for: cold water R80 – H and hot water R80 – H

easy maintenance thanks to the removable measuring insert

long-lasting and reliable operation thanks to the double-sided bearing-mounted impeller

capable of operating at a working pressure of up to 16 bar

high measurement sensitivity thanks to a low starting flow

a wide measuring range enabling the measurement of high flow rates

clear display of readings thanks to the six-drum counter

Looking for alternatives?
Discover other water meters in our range

MWN Nubis, MWN 130 Nubis; -NKOP

A screw-type water meter designed for precise measurement of cold and hot water consumption

Polish MWN water meter
Standard water meters (Ti/IR) are designed for optical or inductive reading
The ability to perform remote readings using a reed switch transmitter, an optoelectronic transmitter or communication adapters

See

JS Impero (R315)

Single-jet vane-wheel water meter for cold water (up to 50°c)

High-quality Polish JS Impero water meter (DN50–100)
Standard water meters (Ti.Ir) are designed for optical or inductive reading
Remote readings can be taken using a reed switch transmitter, an optoelectronic transmitter, or the following interfaces: radio, MBus and pulse

See