Rozłącznik izolacyjny smartARS-XT pro

smartARS-XT pro

Vertical fuse switch disconnector with fuse monitoring module

  • SMR fuse link blowout module

  • A flame-retardant, self-extinguishing plastic with a V0 flammability rating

  • Two-pole contact arrangement

Ask about this product

Na każdą wiadomość staramy się odpowiadać maksymalnie w 24 godziny (dni robocze).

Find out what the smartARS-XT pro switch disconnector has to offer

The smartARS-XT pro switch disconnector can be fitted with a device that indicates the current status of the fuse links. Information regarding blown fuses, correct operation or loss of voltage is indicated by appropriate LED signals or can be transmitted to a master system directly from the module via an RS-485 interface using the MODBUS communication protocol.

Quick installation using PPN technology

A device equipped with a CT/VT analyser interface module

SMR module output via an RS485 connector using the MODBUS communication protocol

Option to change the direction of the drain flow from top to bottom

Designed for installation on 185mm busbar systems

Versions


smartARS 2-XT pro switch disconnectors – 400 A
Installation on a busbar with a pitch of 185 mm,
SINGLE-POLE SWITCHING - each phase individually		Installation on a busbar with a pitch of 185 mm,
3-POLE SWITCHING - 3 phases with a single handle
  • smartARS 2-1-V-XT pro cable connection: V-type terminals; V-clamp 240mm²
  • smartARS 2-1-M-XT pro cable connection: crimped M12 nuts
  • smartARS 2-1-2V-XT pro cable connection: 2V-type terminals; double V-clamp 240mm²


  • smartARS 2-6-V-XT pro cable connection: V-type terminals; V-clamp 240mm²
  • smartARS 2-6-M-XT pro cable connection: crimped M12 nuts
  • smartARS 2-6-2V-XT pro cable connection: 2V-type terminals; double V-clamp 240mm²


smartARS 3-XT pro switch disconnectors - 630 A
Installation on a busbar with a pitch of 185 mm,
SINGLE-POLE SWITCHING – each phase individually

Installation on a busbar with a pitch of 185 mm,
3-POLE SWITCHING - 3 phases with a single handle
  • smartARS 3-1-V-XT pro cable connection: V-type terminals; V-clamp 240mm²
  • smartARS 3-1-M-XT pro cable connection: crimped M12 nuts
  • smartARS 3-1-2V-XT pro cable connection: 2V-type terminals; double V-clamp 240mm²

  • smartARS 3-6-V-XT pro cable connection: V-type terminals; V-clamp 240mm²
  • smartARS 3-6-M-XT pro cable connection: crimped M12 nuts
  • smartARS 3-6-2V-XT pro cable connection: 2V-type terminals; double V-clamp 240mm²

Insert control module

Description of the insert status control module’s operation

Rated parameters

  • LED lights up green – correct operation, fuse links intact
  • LED lights up red – incorrect operation, fuse links blown
  • LED flashes red – voltage present at the output terminal (fuse links blown)

  • LEDs are not lit – no power supply


  • Test voltage for connecting cable testing: 2.5 kV DC
  • Minimum operating voltage 200 V
  • Maximum operating voltage 450 V
  • Uimp surge voltage on burnt-out insert 4 kV
  • Uimp between phases 4 kV
  • Uimp between main circuit/relay contacts 3.5 kV
  • Permissible temperature range -40...+85°C
  • Rated insulation voltageUi 1000 V

Applications of the smartARS-XT pro isolating switch

Transformer stations

The use of strip-type fuse switch disconnectors in transformer substations ensures the highest standards of operational safety. The design of the switchgear allows for rapid disconnection of the power supply. Furthermore, its resistance to harsh conditions and temperature fluctuations means the equipment does not require frequent servicing, thereby reducing operating costs.

Low voltage switchgears

The strip-type fuse switch disconnector is a solution designed to optimise space in LV switchgear. Thanks to its compact design, it facilitates the arrangement of equipment whilst ensuring reliable circuit protection. A well-designed connection system allows cables to be neatly and safely routed, which speeds up installation and makes future inspections easier.

Cable connectors

The strip-type fuse switch disconnector ensures effective circuit isolation, thereby enhancing staff safety during operational work. Furthermore, the device minimises the risk of phase-to-phase short circuits, and its design guarantees the stability of the network parameters.