IN-PULSE - indukcyjna nakładka impulsowa

IN-PULSE

Universal induction pulse cap

Can be used with Apator Powogaz water meters designed for the installation of inductive pulse sensors
Easy installation – installation without affecting the water meter’s metrological characteristics
No storage mode – the overlay is delivered to the customer pre-programmed and configured; ready for immediate use

Find out what the IN-PULSE attachment has to offer

IN-PULSE is a universal pulse adapter designed for cooperation with various types of water meters manufactured by Apator Powogaz S.A., with a degree of protection IP65 or IP68, which are fitted with an inductive pointer (Ti). The device is mounted directly onto the water meter’s counter or using a CT/VT ring, without affecting its metrological characteristics, even during operation. The adapter enables wired transmission of measurement data. The IP68 design allows for installation and measurement in harsh environmental conditions, e.g. in damp water meter chambers. The device is delivered to the customer fully configured and ready for operation immediately after installation. By using the IN-PULSE adapter, you gain:

Installation without affecting the water meter’s calibration

Battery lifetime of up to 12 years

Resistance to external magnetic fields

IP68 rating, providing protection in harsh aquatic and humid environments

Ready to use straight away after installation

Parameter	IN-PULSE
Mounting method	Direct installation on the water meter using a #UTIP (Universal TI Plug) connector – IP68 rating (with a lock to prevent unauthorised removal of the cap) or via an adapter ring – IP65 rating
Pulse counting method	Inductive resonance module
Power supply	3.6 V lithium battery
Battery lifetime	12 years for a temperature profile of: 10% of the time at 10°C 80% of the time at 20°C 10% of the time at 30°C
Correct operating temperature	–15°C to 60°C
Connection cable	5-core, 3 m long
Number of pulse outputs	2
Pulse width	65 ms
Closed-contact resistance	Up to 70 Ω
Short-circuit current	Up to 100 mA
Maximum voltage	30 V
Degree of protection	IP68
Dimensions	130 x 73 x 42.7 mm
Standards compliance	See appendix CE Declaration
Weight	0.106 kg