JS Master C+ (for R160)

Single-jet vane-wheel water meter for cold water (up to 50°c)

High-quality Polish JS Master C+ water meter (DN25–40)
Standard water meters (Ti.Ir) are designed for optical or inductive reading
Inlet duct design that stabilises the flow

Find out what the JS Master C+ water meter has to offer

The JS Master C+ is a high-quality vane-wheel water meter designed to measure cold water consumption up to 50°C. Thanks to the stable design of the inlet channel, it ensures precise measurement and accurate meter readings. It features a hermetically sealed, anti-fogging meter, and a rotation lock on the counting mechanism protects the water meters against malfunction. The design, featuring a brass body and anti-magnetic protection, increases resistance to external interference. Water meters cooperate with remote data transmission systems. By using the JS Master C+, you gain:

Remote reading capability thanks to compatibility with radio interface modules and a pulse interface module for installation

Clear readings in all conditions thanks to the sealed, anti-fog display

Protection of the mechanism against malfunction by locking the counting mechanism at angles greater than 360°

Stable and precise measurement thanks to the application of a double-sided bearing rotor

Rapid detection of faults thanks to alarms triggered by events such as the removal of the cover, backflow or leaks

Effective protection against external interference in accordance with EN 14154, thanks to protection against strong magnetic fields

Capable of operating at a working pressure of up to 16 bar

Type*	R	_Q3 [^m³/h]	DN [mm]	Length [mm]	Thread
Cold water meters
JS 6.3 Master C+	R160	6.3	25	260	G1 ¼
JS 6.3-NK Master C+	R160	6.3	25	260	G1 ¼
JS 10-G1 ¼ Master C+	R160	10	25	260	G1 ¼
JS 10-G1 ¼-NK Master C+	R160	10	25	260	G1 ¼
JS 10 Master C+	R160	10	32	260	G1 ½
JS 10-NK Master C+	R160	10	32	260	G1 ½
JS 16 Master C+	R160	16	40	300	G2
JS 16-NK Master C+	R160	16	40	300	G2

Water meter design: water meter with a five-drum counter, suitable for the installation of a communication cap, brass body

Special design available to order:
NK – water meter with reed switch transmitter
Copper-glass dial with a degree of protection IP68 (cold water only) – new dial design from 2020, cooperation with induction adapters.

Looking for alternatives?
Discover other water meters in our range

Ultrimis (DN15–50)

An innovative ultrasonic water meter

One of the smallest ultrasonic water meters on the market
The unique W-Sonic Technology measurement method
Fully resistant to the effects of strong magnetic fields

See

JS Smart C+ (for R160)

Single-jet vane-wheel water meter for cold water (up to 50°c)

High-quality Polish JS Smart C+ water meter
Resistance to strong external magnetic fields
Installation: Wireless M-Bus adapters, pulse adapters and M-Bus adapters

See

JS Master D+ (for R200)

Single-jet vane-wheel water meter for cold water (up to 50°c)

A tried-and-tested, robust design
Long service life
The abacus mechanism is protected against mechanical damage

See

JS Impero (R315)

Single-jet vane-wheel water meter for cold water (up to 50°c)

High-quality Polish JS Impero water meter (DN50–100)
Standard water meters (Ti.Ir) are designed for optical or inductive reading
Remote readings can be taken using a reed switch transmitter, an optoelectronic transmitter, or the following interfaces: radio, MBus and pulse

See