JS Smart+ (for R100)

A single-jet vane-wheel water meter designed for accurate measurement of cold and hot water consumption

Polish JS Smart+ water meter
Resistance to strong external magnetic fields
Installation: Wireless M-Bus adapters, pulse adapters and M-Bus adapters

Find out what the JS Smart+ water meter has to offer

The JS Smart+ is a high-quality Polish single-jet water meter designed to measure the consumption of both cold water (up to 50°C) and hot water at temperatures of up to 90°C. It provides reliable readings in full-flow installations and stable operation at operating pressures of up to 16 bar. Thanks to its well-thought-out design, it allows for easy reading of the display and maintains high measurement accuracy in various mounting positions. By using the JS Smart+, you gain:

Measurement reliability confirmed by compliance with MID metrological requirements

Clear and trouble-free readings thanks to the sealed, anti-fog display

Stable and precise measurement thanks to the application of a double-sided bearing rotor

Protection against external interference and solutions to mitigate the effects of water freezing

The option to expand the measurement system with a wired or wireless remote reading system

Type*	R	Q₃ [m³/h]	DN [mm]	Length [mm]	Thread
Cold water meters
JS 1.6-02 Smart+	R100	1.6	15	110	G¾
JS 1.6-03 Smart+	R100	1.6	15	110	G¾
JS 2.5-02 Smart+	R100	2.5	15	110*	G¾
JS 2.5-03 Smart+	R100	2.5	15	110	G¾
JS 2.5-G1-02 Smart+	R100	2.5	20	130	G1
JS 4-02 Smart+	R100	4	20	130	G1
Hot water meters
JS90 1.6-02 Smart+	R100	1.6	15	110	G¾
JS90 1.6-03 Smart+	R100	1.6	15	110	G¾
JS90 2.5-02 Smart+	R100	2.5	15	110	G¾
JS90 2.5-03 Smart+	R100	2.5	15	110	G¾
JS90 2.5-G1-02 Smart+	R100	2.5	20	130	G1
JS90 4-02 Smart+	R100	4	20	130	G1

Water meter models:
-02 – 8-drum counter, brass body, water meter suitable for installation of a communication cap,
-03 – 8-drum counter, composite body (applies to JS 1.6 and JS 2.5 with a length of 110 mm, R100 for cold water and hot water).
On request:
- IP68 – degree of protection for the meter,
- Ti/IR – with a pointer for optical or inductive reading,
- with hard bearings (water meters intended for hot water circulation systems).
* Non-standard body lengths are available for JS 1.6/2.5 DN15 and DN20: L = 80 mm ¾” -> ¾”, L = 115 mm ¾” -> ¾”,

Looking for alternatives?
Discover other water meters in our range

Ultrimis (DN15–50)

An innovative ultrasonic water meter

One of the smallest ultrasonic water meters on the market
The unique W-Sonic Technology measurement method
Fully resistant to the effects of strong magnetic fields

See

JS Smart C+ (for R160)

Single-jet vane-wheel water meter for cold water (up to 50°c)

High-quality Polish JS Smart C+ water meter
Resistance to strong external magnetic fields
Installation: Wireless M-Bus adapters, pulse adapters and M-Bus adapters

See

JS Master D+ (for R200)

Single-jet vane-wheel water meter for cold water (up to 50°c)

A tried-and-tested, robust design
Long service life
The abacus mechanism is protected against mechanical damage

See

JS Impero (R315)

Single-jet vane-wheel water meter for cold water (up to 50°c)

High-quality Polish JS Impero water meter (DN50–100)
Standard water meters (Ti.Ir) are designed for optical or inductive reading
Remote readings can be taken using a reed switch transmitter, an optoelectronic transmitter, or the following interfaces: radio, MBus and pulse

See